Nace Mr0175 2003 | 您所在的位置:网站首页 › nace mr0175 › Nace Mr0175 2003 |
purchasing, or using products, processes, or procedures not in conformance with this standard.
Nothing contained in this NACE International standard is to be construed as granting any right, by implication or otherwise, to manufacture, sell, or use in connection with any method, apparatus, or product covered by Letters Patent, or as indemnifying or protecting anyone against liability for infringement of Letters Patent. This standard represents minimum requirements and should in no way be interpreted as a restriction on the use of better procedures or materials. Neither is this standard intended to apply in all cases relating to the subject. Unpredictable circumstances may negate the usefulness of this standard in specific instances. NACE International assumes no responsibility for the interpretation or use of this standard by other parties and accepts responsibility for only those official NACE International interpretations issued by NACE International in accordance with its governing procedures and policies which preclude the issuance of interpretations by individual volunteers.
Users of this NACE International standard are responsible for reviewing appropriate health, safety, environmental, and regulatory documents and for determining their applicability in relation to this standard prior to its use. This NACE International standard may not necessarily address all potential health and safety problems or environmental hazards associated with the use of materials, equipment, and/or operations detailed or referred to within this standard. Users of this NACE International standard are also responsible for establishing appropriate health, safety, and environmental protection practices, in consultation with appropriate regulatory authorities if necessary, to achieve compliance with any existing applicable regulatory requirements prior to the use of this standard.
CAUTIONARY NOTICE: NACE International standards are subject to periodic review, and may be revised or withdrawn at any time without prior notice. NACE International requires that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of initial publication. The user is cautioned to obtain the latest edition. Purchasers of NACE International standards may receive current information on all standards and other NACE International publications by contacting the NACE International Membership Services Department, 1440 South Creek Dr., Houston, Texas 77084-4906 (telephone +1 [281]228-6200).
Revised 2003-01-17 Approved March 1975 NACE International 1440 South Creek Dr. Houston, Texas 77084-4906 +1 (281)228-6200
ISBN 1-57590-021-1 © 2003, NACE International NACE Standard MR0175-2003 Item No. 21302
COPYRIGHT 2003; NACE International
Document provided by IHS Licensee=Fluor Corporation/2110503105, User=, 04/09/2003 02:42:32 MDT Questions or comments about this message: please call the Document Policy Management Group at 1-800-451-1584. --`,```,```,,`,,``,,,`,,`,,,,,`-`-`,,`,,`,`,,`--- |
CopyRight 2018-2019 实验室设备网 版权所有 |